Polaris RZR Rear Radius Rod Set
APPROXIMATELY 2 WEEK LEAD TIME. GIVE US A CALL TO PLACE YOUR ORDER.
2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius rods: 10mm or 12mm bolts. Before purchasing your pull plate for your 2017 Polaris RZR, you need to determine if you have 10mm or 12mm hardware. To figure this out we need to determine the bolt head size by using either a 15mm socket for 10mm shank bolts, or an 18mm socket for 12mm shank bolts. If you determine you have a 10mm shank bolt please order a 2016 radius rod set instead, and this will ensure we deliver the correct rods.
If you are like many and suffer from a failed radius rod you know how bad it can be for that big ride. We have a solution to solve all of that for you.
We produce a quality solid Billet aluminum radius rod to replace the weak factory pieces.
Our rods are machined from a solid piece of 1.25 Billet hex aluminum. That's right one and a quarter inch of solid Billet aluminum. These rods are larger than majority of similar products on the market, and sure to stand up to the abuse. Our radius rods are then hard coat anodized then they receive all 304 stainless jamb nuts for anti corrosion and heavy duty 5/8 chromoly heims. We also machine our own misalignment spacers from a solid bar stock of 304 stainless, giving you the highest quality fit and finish possible.
Machined after anodize to put the final touches on an already quality piece.
We offer only FK brand heims with all of our products for a superior fit, and long lasting product every time. However, we offer two series of heim joints from FK precisoin rod end line.
And as always our radius rods, like all of our products, have a FULL LIFETIME WARRANTY against defects. You break it we replace it, just as easy as that.
For the perfect match made in heaven, match these radius rods with our billet rear pull plate.
IMPORTANT NOTE: These radius rods utilize a right hand thread on BOTH ends of the rod. This does make adjustment more difficult, however the radius rods are preset for your vehicle and need no adjustment. Using right hand threads on both ends of the rod also makes it impossible for the jamb nuts to ever loosen and cause the rod to completely unscrew itself from the machine.